2Deals.net News blog

Nikon Coolpix S8100 Charger than large high-end DC market Nikon main types, to attract to much attention from the beginning of the release. In appearance and total budget, Nikon is a professional P7000 van. Nikon P7000 see the body of the design, we a lot of professional level of design, mode select record, exposure compensation dial plate, boots, lens QuJingKuang hot Flash, AE-lock button, etc.. The P7000 are very enriched playability as a whole.

Nikon P7000 installation external Flash

And the development of new C2 EXPEED processor, can improve the control in hardware configuration, but with reduced Nikon P7000 a gold 1/1.7 inch sensor, effective pixels to 10.1 million, although the pixel range a camera-noise capability to improve quality has very great help. In addition the P7000 Nikon lens is another point, the camera uses have 28-200 mm equivalent focal length 7.1 times, the the optical zoom lens. The focal length configuration can the DuoZhong use of main environment is very convenient for users.

Dealing with the professional good hardware configuration, can be much work to stop professional SLR Nikon P7000. This time, we will introduce full portrait of shooting techniques and methods to use Nikon P7000 with external flash. For Nikon P7000 with external Flash that can be changed forever.

First Nikon P7000 simple setup: adjust the metering modes for average, Center-weighted metering or spot metering, AF Zone, in order to better control Flash exposure index; Calibration to adjust the light set optimization option can be used to improve the expression; Exposure compensation adjustment to 0.3 EV, prevent that a Flash after exposure to use; Setting the white balance, Flash mode. Set up cameras, flash, after installing the TTL model, to customize everything ready.

The difference between the effect on flash

First must we see Installing external Flash and built-in flash to see if external Flash, image effect change installation Collaosed Nikon P7000 distinction by diagram.

From the above we can see that Flash does not use: ambient light shooting, all is opuschennyje light, but the subject of simple sense, easy-to-fall, cause that wiggle the camera shutter. Flash, cabin reduce hard enough, flash photography, due to the strength of the direct light is third gear, also try. Install external flash, set to TTL output, reduce the flash intensity two-thirds file ceiling flash technology, the image of the jump was recorded body texture and the shaded part performance are all well and good, also greatly increase the information about the expressive power.

Again by two two of the chart to the actual portrait shoot, see effect. Increase of the external Flash, Nikon EN-EL9 Battery in the within of the expressive power of the rose. The color of a true, is the reduction of detail processing. Stereo feeling, character, even if the environment is not excellent light strong (cloudy outdoor, inside some partially dark), but the ceiling form jump flash flash, environment light increased exposure in the portrait of the light is not very stiff face.

Due to the high end DC in progress by fully a Flash the requirements on professional, so use tie-the basic and the SLR to use a Flash is not much difference. However due to the limitation of the hardware configuration, we need even more attention to some details.

Although manual setting function has the most external Flash, but still recommend choose TTL mode using a camera and Flash, the size of the height of the light output. In addition, the Flash should use as much as possible, if the flash technology, using wall jump, ceiling, light realize evenly distributed. Use of flash technology as shoot, jump to the General flashes ceiling and wall lighting, the position of the light source can be thought of refraction as light box. To realize the man of the traditional electric lighting. In photography is the angle of the characters and the direction to jump the Flash key, you have to try DuoCi. To be on the safe side, flash in the direction of the wall are rotated 45 degrees and ceiling, the light lighting the whole House are full greatest extent possible.

Another important point is: outdoor-use Flash movies, available light sometimes influence the accuracy of the white balance, General recommend the use of K-value of the adjustment not recommend automatic white balance AWB, use flash light supplement should be set to the Flash and white balance around 5500 k. And use automatic white balance, not easy to be the environment color interference. Direct flash molding.the again on the electric lighting can be in the cloudy shooting light downy rich flash light is an addition to lighting quality levels, using too hard will result. Excessive use of the positive light complement and ignored the backlight, led to the use of the image is the main cause of flat light oblique.

The external Flash Nikon P7000 pick up wider applicability, shoot is also easier and more convenient. However, sometimes you can flash for foreign: the best is to turn it off. As you have more and more qualified with Flash, you can tend to use it right now. But you can not always on Flash. Finally, in many cases very good light can have. Only if you need a little extra light, you know that you get a good shot with the Flash, that is enough.

Tags: hardware configuration, lighting, Nikon, Science and technology, the Flash